preloader

Blog

An Article By Mr. Avinash Chabukswar, Director C-Tech Engineers Pvt. Ltd, on “MOLYKOTE”
Designing & Manufacturing facility

An Article By Mr. Avinash Chabukswar, Director C-Tech Engineers Pvt. Ltd, on “MOLYKOTE”

An Article by Mr. Avinash Chabukswar, Director C-Tech Engineers Pvt. Ltd, on “MOLYKOTE” published in EQUIPMENT INDIA FEB 18 IssueThe main goal of Molykote® Anti-friction coating PA 744 on the bushes for excavator was to provide wear protection during scuffing and a very good resistance to chemicals and corrosion based on our assessment of various factors like the Load (bushes are subjected to very high loads), Environment (the environment is oil loathed and corrosive), temperature (extreme temperatures -75 Degree Centigrade to up to 300 Degree Centigrade) and speed or movements is slow. Application of Molykote® on ID of bushes can increase wear resistance, Impact strength and retention of lubricating film at extreme temp variations.

Overall layer is of 15 micron which is done in two stages by

Phosphating
Application of the Molykote® PA 744
Curing of the PA 744
Repeat the steps 2 and 3 to achieve desired 12-20 micron. #Molykote #coating #surfacecoat #ctech #Ctechindia #equipementindia

Write a Comment

Your email address will not be published. Required fields are marked *

Linkedin

https://www.linkedin.com/feed/update/urn:li:activity:6628272183451975680